1. that oil might be cooked in that circuit. oil turns into a graphite sludge when high pressure and high superheat exist for long constant operation .

   Reply

2. I have a question to you as a business owner, I had a machine quite rare in my area but regardless yanmar diesel engine running an amonia pump and a infrared heater set up. I was working on wiring someone had wired it ALL WRONG and direct shorting to ground. Gravity switch with a big ball bearing in it that trips a micro switch if it moves WORST DESIGN EVER. Guy is up my butt the hole time telling me how he knows a guy and he did the wiring based on what the guy told him and I finally lost my nerve with the rude buligerant dude. " Look guy, I'm one of the few certified for the yanmar side of this in a pretty large distance. I want to just walk off and you can go piss up a rope, I've had it with you. You don't know what your doing and you royally f'd this thing up. When I'm done un-DIYing it I'll let you know and present you with a bill. Afterwards don't ever call me again" Long story short how would you handle these scenarios.

   Reply

3. Have you done any water cooled condenser videos I had a walk in that had the bottom 3/4 of the evaporator freezing up so I suspected that the expansion valve was not feeding correctly but found out that the superheat was alittle high 21° and subcooling was a little low 2°F sight glass was clear with coil clear of frost and TXV sweating not frosting compressor current low which caused me to suspect a slight refrigeration undercharge but after I charged a couple of ounces till the subcooling went up to 9.6°F and superheat was 12-14° and compressor amp draw was normal until the High pressure safety opened so I adjusted the water pressure valve but the customer has called in again and say the HP is opening again I was using the measure quick app and it says all is green I also had a discharge line temp of 138°F I don't work on water cooled equipment very often so I wanted your opinion on this diagnosis.

   Reply

4. Speaking of mentoring. My guys & I regularly watch your videos as a group session. It's important to me that I'm not the only dude that expects nothing but the best for customer satisfaction. Showing them that being meticulous in locating problems. Pointing out to find the WHY instead of being a parts changer.

   I've seen loads of other channels & hands down you're the most reliable & informative. Keeping it simple, but thorough. Kudos, Chris. Are you in Orleans ?

   Reply

5. When’s your next live stream??

   Reply

6. You might not be a millionaire but you can look your family in the eye and feel good about it.

   Reply

7. i was expecting to see Chris streaming himself cleaning his pc

   Reply

8. 'Piss beers'! Know what you mean, Carling in the UK is known as 'Angel Piss' to many here. I prefer more ale/hop based beers myself or cider, however piss beer can be ok when it's roasting hot.

   Reply

9. purple people eaters. yes.

   Reply

10. where do I join the chat for these live streams? Service area Kanata??

    Reply

11. The 3 haters are home owners

    Reply

12. Wish I was still young and able but all the years of experience and ladders got the best of me . Still like your video content good luck

    Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.